Indoor dining and living furniture, made for how Singapore hospitality actually runs
One workshop, one point of contact, and one production run for the dining room and the lounge that sits beside it — so a restaurant fit-out and a lobby refresh can be specified, finished, and shipped as a single collection.
Urban Maisons manufactures indoor dining and living room furniture for hotels, resorts, restaurants and F&B operators across Singapore — direct from our 4,000 sqm facility in Jepara, with a logistics and showroom hub in Shah Alam, Malaysia, and consolidated shipping into Singapore that doesn’t require a full container.
Two rooms, one supplier
Most Singapore hospitality projects end up sourcing dining furniture from one vendor and lounge or living-area furniture from another — different lead times, different finish libraries, and two sets of samples to approve. It rarely matches on site.
This page brings both under one roof. The same joinery team, the same teak and fabric libraries, and the same shipping schedule cover a restaurant’s dining chairs and a lobby’s lounge seating, so a property can specify a coherent look across public areas without coordinating two manufacturers.
Every piece is built to order, with standard customisation — fabric, finish, and dimensions — included at no extra cost on dining furniture, and no minimum order quantity when a hotel or restaurant needs to replace a single damaged chair years after the original order.
Built for service, not just for show
Restaurant, hotel F&B outlet and banquet dining furniture, engineered for nightly turnover and finished to match your interior design brief.
Dining Tables
Two-tops to large communal tables, in solid teak, veneer, stone or laminate tops with matching or contrast bases.
Dining Chairs
Upholstered, cane-woven or solid-wood dining chairs rated for commercial daily use, in any COM fabric or leather.
Bar & Counter Stools
Fixed and swivel bar-height seating for show kitchens, wine bars and lobby bar counters.
Dining Accessories
Table settings, trolleys and the small fittings that finish a dining room to spec.
Public areas that hold up to daily footfall
Lobby, lounge and living-area furniture for hotels and resorts — comfortable enough for guests, durable enough for a commercial cleaning schedule.
Sofas & Lounge Seating
Two, three-seat and modular sofas in performance fabrics or leather, sized for lobbies, suites and F&B waiting areas.
Coffee Tables
Statement centre tables in teak, stone-top or mixed-material designs, built to anchor a lounge seating group.
Side Tables
Companion side tables sized to sit beside a sofa, armchair or day bed.
TV Consoles
Media consoles and low cabinetry for suites, villas and residential-style lounges.
Storage Units
Sideboards, credenzas and cabinetry for lobby, lounge and back-of-house storage.
Accessories
Trays, mirrors and small furnishings that complete a living or lounge setting.
Order it together, replace it piece by piece
Your dining chairs and your lounge armchairs are logged against the same SKU archive, so a single damaged piece can be rebuilt to the exact original spec — no matter how long ago the original order shipped.
- 01 Every order is recorded against a permanent SKU — frame, finish, fabric and dimensions — for both dining and living pieces.
- 02 Replacement pieces ship with no minimum order quantity, so one broken chair doesn’t mean reordering a set.
- 03 Fabric, powder-coat and teak-finish customisation is included at no extra cost on dining furniture.
- 04 One production and shipping schedule covers both dining and living-area pieces, so public areas open in step.
Direct from the workshop that builds it
SVLK & FLEGT certified
Legal, traceable timber sourcing on every teak component, documented for import compliance.
One-year warranty
Manufacturer warranty on outdoor pieces, backed by a factory that can rebuild to the original spec.
Factory visits welcome
Inspect production in Jepara by appointment before committing to a full order.
Consolidated SG shipping
Door-to-door delivery to Singapore without waiting to fill a full container.
From brief to installed, in four steps
Consult & specify
Share your floor plan and material palette; we scope dining and living pieces as one collection.
Sample & approve
Fabric, finish and frame samples are sent for sign-off before production begins.
Produce
6–10 week standard production in Jepara, with 50% deposit and balance before shipment.
Ship & deliver
Consolidated shipping into Singapore, door-to-door, at roughly S$200 per CBM.
Common questions from Singapore properties
Can dining and living furniture be ordered together on one timeline?
Yes. Both are produced in the same facility, so a restaurant’s dining set and a lobby’s lounge furniture can be specified, sampled, and shipped as a single order rather than two separate vendor timelines.
Is there a minimum order quantity?
No minimum applies to replacement pieces. If a single dining chair or lounge armchair needs replacing years after the original order, it’s rebuilt to the same SKU without requiring a full new set.
What customisation is included at no extra cost?
Fabric, powder coating and teak finish customisation is included at no additional cost on dining furniture. Living and lounge pieces can also be customised — ask your account contact for scope on a given design.
How is furniture shipped to Singapore?
Consolidated shipments run monthly from Indonesia to Singapore, so a single item can ship door-to-door without waiting to fill a full container, at roughly S$200 per CBM.
Can we visit the factory before ordering?
Yes, factory visits to the Jepara production facility are welcome by appointment.
Do you offer OEM or white-label production?
Yes, an OEM and white-label arm is available for designers and resellers, with an NDA in place before design work begins.
Specify your dining room and lounge as one collection
Send your floor plan and material palette — we’ll come back with a proposal covering both spaces.