Solid teak doors for Australian homes, built by the makers
Carved, pivot, double and everyday entry doors in solid Grade A teak, each supplied with its outer frame. Made by our own craftsmen in Indonesia and delivered door-to-door anywhere in Australia, whether you need one door or a hundred.
Teak Doors Manufacturer Australia: Direct From Our Workshop to Your Door
Urban Maisons is the teak doors manufacturer Australia’s homeowners, builders and architects can order from without a middleman. We cut, carve, finish and pack every door in our own 4,000 sqm factory in Indonesia, where carving skills handed down over generations go into every Australian order.
Most solid timber entry doors sold in Australia are imported anyway. Buying from the workshop that makes them means you see the real production, talk to the people building your door and pay a factory price rather than a showroom one. Our quotes are easy to compare, and we encourage you to put them next to any other supplier’s.
Each door leaves us with its outer frame, a touch-up kit in your chosen finish, and the legal timber and biosecurity papers Australian clearance asks for. Then we deliver it to your address, duties paid.
Carved teak entry doors that set the tone of a house
Our woodcarvers spend days on a single leaf. These four designs are the ones Australian buyers ask about most, and each can be scaled to your opening and finished in any tone.

Sunburst carved double door
Hundreds of hand-cut rays radiating from a brass centrepiece, finished in deep espresso. A real showpiece for a wide entrance.

Fan-carved teak pivot door
A sweeping fan carved across one oversized leaf. Built as a pivot door for tall, architectural entries.

Lattice double entry door
Raised panels with a fine diamond lattice and a half-moon centre. Classic, warm and very hard to get wrong.

Woven-strip modern front door
Clean teak boards with one carved woven band. Quiet enough for a minimalist façade, crafted enough to notice.
Teak front doors and entry doors by model
Tap Enquire on any door and its model code and photo come straight to us on WhatsApp. As the teak doors manufacturer Australia orders come straight to, we build every model to your size, with its outer frame, in natural oil, clear coat or any stain.

Vertical plank solid teak door

Fluted teak entry door

Eight-panel teak door

Three-panel teak internal door

Six-panel dark teak front door

Horizontal slat teak front door

Ten-panel teak door

Stepped-reveal modern teak door

Split fluted teak pivot door

Diagonal slat teak door

Classic double teak entry door

A timber that copes with the Australian climate
Teak carries natural oils through the heartwood. That is why it holds its shape through humid Queensland summers, salty coastal air and dry inland heat, where many timbers swell, check or warp.
Left unfinished, teak weathers to a silver grey. Oiled or sealed, it keeps its honey-brown colour. Doors facing full western sun do best under an eave or porch, whichever finish you choose.
| Timber | What buyers usually notice |
|---|---|
| Teak | Very stable, naturally oily, fine even grain, warm golden colour |
| Merbau | Hard and dense, deep red-brown, known to bleed tannins when new |
| Spotted gum | Hard local hardwood, strong figure, heavier and harder to machine |
How your teak door is made
These clips and photos come straight from our factory floor, with no filters and no edited backgrounds. More than 50 craftsmen select the timber, kiln dry it, join, carve, sand and finish each door under one roof, so we control every stage instead of buying in from middlemen.






Factory visits are welcome by appointment.
Finished teak doors, photographed as they are






What you can choose
Teak doors Australia buying guide
Pivot, hinged or double: which teak entry door suits your home?
A pivot door turns on a pin set in from the edge rather than on hinges. That lets a single leaf be much wider and taller than a hinged door, which is why pivots suit architect-designed homes with high ceilings. Our fan-carved and split-fluted designs are built for this.
A hinged front door is the familiar choice for most Australian houses and renovations. It fits a standard opening, works with everyday locks and handles, and is the most affordable way into solid teak.
Double entry doors give a wide, welcoming entrance for larger homes, resorts and lobbies. The sunburst and lattice designs were drawn as pairs, so the carving meets in the middle.
We also make teak French doors, doors with glazed sidelights, sliding barn doors and internal doors to drawing.
Teak door sizes for Australian openings
Every Urban Maisons door is made to the opening you give us, so you are never stuck with a stock size. As a starting point, these are the sizes most Australian builders work with:
| Door type | Common height | Common widths |
|---|---|---|
| Standard front door | 2040 mm | 820, 870 or 920 mm |
| Tall front door | 2340 to 2400 mm | 920 mm and up |
| Pivot entry door | To your drawing | Often 1000 mm and wider |
| Double entry doors | 2040 mm and up | Pairs from about 1640 mm overall |
Measure the finished opening, not the old door, and confirm the sizes with your builder before production starts. The outer frame is built to suit, so the door arrives as a complete unit ready to hang.
What sets the price of a teak front door
- Size. Bigger leaves use more Grade A timber and need more careful drying and joinery.
- Carving. A flush door is quick; a sunburst or fan design takes our carvers days.
- Finish. Natural oil is simplest. Dark stains and multi-coat clear finishes take longer.
- Glass and panels. Glazed sections add materials and labour.
- Quantity and freight. Delivery cost per door drops as the order grows.
Because there is no importer or retailer between us, the price you get is the factory price plus delivery to your door. Send a size and a reference photo and we will quote a delivered price, usually the same day.
Finishes and colour
Teak takes finish well, and as the teak doors manufacturer Australia projects come to for custom colour matching, we finish to any tone. A natural oil keeps the grain open and warm and is easy to refresh. A clear coat holds the honey colour longer with less upkeep. Stains range from light honey to the deep espresso of our sunburst door. Whatever you pick, the same colour comes back to you as a touch-up kit with the order.
Ordering one door or a whole project
A homeowner replacing a single front door gets the same door-to-door service as a developer ordering a hundred. For projects we work from your door schedule, label every door and frame by opening, and pack them so your site team can unload and fit in order. Builders and designers can also ask about our custom and OEM manufacturing for Australia.
How to choose a teak door manufacturer for Australia
Ask any supplier the same five questions before you order:
- Do they make the doors themselves, and can they show real production photos?
- Is the timber Grade A teak heartwood, and is it kiln dried?
- Can they provide legal timber paperwork for Australian import rules?
- Does the door come with a frame, and who handles customs and duties?
- What happens if a door is marked in transit?
As a teak doors manufacturer Australia buyers deal with directly, we can answer yes to all five, and this page shows the proof.
From our factory to your site, door-to-door
Buying from an overseas teak doors manufacturer, Australia delivery should be the easy part. We ship on DDP terms. That means freight, customs clearance and duties are taken care of, and your doors arrive at the address you give us. It works the same for a single front door as for a hundred doors on a development.
Sydney · Melbourne · Brisbane · Perth · Adelaide · Gold Coast · Sunshine Coast · Byron Bay · Darwin · Hobart
- Any quantityOne door or a hundred, delivered door-to-door on the same terms.
- Legal timberSVLK/V-Legal and FLEGT documents support your due diligence under Australia’s illegal logging laws.
- BiosecurityKiln-dried timber and the treatment and declaration paperwork Australian clearance requires, prepared before shipping.
- Customs and dutiesHandled under DDP, so there are no surprise charges on arrival.
- Frame includedEach door arrives with its outer frame, made to the opening sizes you confirm, ready for your builder or carpenter to hang.

Packed to arrive the way it left our workshop
A teak door travels thousands of kilometres by sea and road before it reaches your site, so we pack each one to protect its faces, edges and corners the whole way.
Our annual records put reported transit damage at around 5% of doors shipped. If a door does pick up a mark, you are already covered: every order comes with touch-up finish in the exact colour you chose.
- Wrapped and edge-protectedFaces, edges and corners covered before the door leaves the finishing room.
- Crated for exportDoors and frames crated in our factory for sea freight and handling.
- Touch-up finish includedMatched to your chosen finish, for any scratch in transit or while hanging on site.
Homes, builds and resorts

Homeowners and renovators
A solid teak front door is one of the few upgrades people see every day. Buy direct from the teak doors manufacturer Australia homeowners deal with one-to-one on WhatsApp, and skip the retail markup.

Builders and developers
Matching doors for whole houses or multi-unit builds, made to your schedule of openings and labelled by door.

Resorts, villas and architects
Custom and carved doors for hospitality projects, built to drawings by the same team that supplies our hotel and resort furniture in Australia.
How an order runs
Most quotes go out the same day, or within 24 working hours for larger projects.
- Send sizes and a referenceOpening sizes, a model code or photo, and your delivery suburb, by WhatsApp or email.
- Quote and drawingA factory-direct, delivered price and a shop drawing for you or your builder to check.
- Production in Indonesia50% deposit starts production. Expect 6 to 10 weeks, with progress photos on request.
- Shipping to your doorBalance paid before shipment, then crated doors travel by sea and clear customs under DDP.