Outdoor Parasols for Hotels & Resorts in the Maldives
Heavy-duty, commercial-grade parasols built to take on monsoon winds and salt air — engineered for hotels, resorts, villas and beach clubs across the islands.
Built for the Maldives’ toughest outdoor settings
Every parasol in this range is designed for rough, daily commercial use — not the occasional weekend in a backyard. Salt-laden air, high UV exposure and sudden wind gusts are the everyday reality for hotels and resorts across the Maldives, so the frame, mechanism and canopy fabric all have to hold up to it.
Beach clubs
Direct sun and sea-spray exposure all day, every day — frames and hardware need to resist corrosion from day one.
Villas & private resorts
Poolside and garden shade that has to look considered and last through years of tropical weather, unattended.
Hotels & resort pools
High guest turnover means daily opening and closing — the mechanism has to stay smooth for years, not months.
Alfresco & rooftop dining
Elevated wind exposure and a need for a clean, restaurant-grade look above the dining table.
Our range of heavy-duty parasols for Maldives hotels and resorts
From commercial-grade aluminium and solid teak center-pole umbrellas to hand-crank cantilever pieces built for ultra-luxury spaces — five constructions covering everyday hospitality use through to signature installations.
The Tressa is available in square and octagonal canopy profiles.
Tressa Heavy-Duty Aluminium Parasol
Our commercial-grade aluminium center pole umbrella, built for hotels, villas and beach clubs that need a parasol to earn its keep every day of the year.
Commercial aluminium frame — rust-resistant, powder-coated aluminium construction that holds up to coastal salt air.
48mm center pole with 2mm wall thickness for a rigid, low-flex structure.
8 ribs, 20×32×1.5mm profile, for even canopy tension under wind load.
Double pulley & drawstring mechanism — opens and closes fully in three easy pulls.
Die-cast aluminium hardware throughout — not the thin stamped fittings found on standard umbrellas.
Available in square and octagonal canopy profiles.
Heavy-Duty Solid Teak Wood Parasol
The same commercial-grade mechanism and rib engineering as the Tressa, built around a solid teak pole for properties that want a warmer, natural finish on the ground.
Sustainably sourced solid teak wood pole — from our SVLK and FLEGT-certified supply chain.
48mm pole diameter for a substantial, stable stance.
8 ribs, 20×32×1.5mm profile, for even canopy tension under wind load.
Double pulley & drawstring mechanism — opens and closes fully in three easy pulls, with the same die-cast aluminium hardware as our aluminium range.
Available in square and round canopy profiles.
Solaro Premium Aluminium Parasol
A center-pole parasol built for spaces where the parasol itself is a design feature, not just shade — a hand-crank opening system and a rotating base for effortless, daily use.
Outdoor powder-coated aluminium frame for lasting resistance to coastal weather.
Ø83mm center pole with 2.5mm wall thickness — substantially heavier-duty than our standard range.
8 ribs, 35×20×1.2mm profile.
Hand-crank opening system with a 360° rotating base, so the canopy can be turned to follow the sun without moving the stand.
Stainless steel 304 fittings and hardware throughout — a step up from the die-cast aluminium fittings on our standard range.
Available in square and round canopy profiles.
Solaro Premium Cantilever Parasol
A side-post cantilever version of the Solaro — the canopy floats clear of the base, so nothing interrupts the dining table or lounge layout beneath it.
Outdoor powder-coated aluminium frame for lasting resistance to coastal weather.
Tapered mast pole: Ø120mm tapering to Ø83mm, 3mm wall thickness, for a rigid arm with zero center-pole obstruction.
Supporting bar: 65×55×3mm cross-arm.
8 ribs, 35×20×1.2mm profile.
Hand-crank opening system with a 360° rotating base, so the canopy can be turned to follow the sun without moving the stand.
Stainless steel 304 hardware with bolted connections throughout.
Available in square and round canopy profiles.
Tressa Cantilever Parasol
The cantilever counterpart to our Tressa range, using a hand-crank slider mechanism and rotating base in a lighter-duty size for pool decks and lounge areas.
Outdoor powder-coated aluminium frame — rust-resistant construction that holds up to coastal salt air.
Tapered mast pole: Ø92mm tapering to Ø68mm, 2mm wall thickness.
8 ribs, 14×24×1mm profile.
Hand-crank slider system with a 360° rotating base — opens smoothly and turns to follow the sun without repositioning the stand.
Stainless steel 304 hardware throughout.
Fabric colours
Canopy fabric from brands including Sunbrella, Sunproof and Sauleda is available. Shown below are a few featured colours — for other desired colours, please enquire with us.
Teal
Sky Blue
Steel Blue
Navy
Olive Stripe
Off-White
Ivory
Powder coating & metal finishes
Aluminium frames are available in the following powder-coated colours and oxidation and wood-grain effect finishes.
Grey
DC6S
Brown
DCOS
Black
DC9S
White
DC3S
Bright Surface Oxidation
Triacid Oxidation
Teak Grain
Oak Grain
Ash Wood Grain
Umbrella base options
Every parasol needs a base matched to its size and setting — from movable weighted bases to natural teak and stone finishes.
Solaro Base
180 kg · sold with separate internal weight plates
Engineered for heavy-duty cantilever and centre-pole models.
Granite Base
45 kg · straight base
Granite Base — 4-Wheel
90 kg · mobile castors
Teak Wood Base
Natural teak finish
Powder-Coated Aluminium Base
Weatherproof finish
Every parasol, every detail
Installed shots, construction detail and hardware close-ups across the range — tap any photo to view it full size.
