Commercial Outdoor Dining Furniture for Maldives Hotels & Resorts
Dining chairs and tables that hold up on a Maldivian pool deck for years, not one season. Built in our own Jepara factory — we’re not a trading company reselling someone else’s catalogue.
Outdoor Dining Chairs
Aluminium, teak, rope, wicker & hyacinth — 24 models built for resort volume.
Explore Chairs →
Outdoor Dining Tables
Teak, sintered stone & compact phenolic tops on rust-proof bases.
Explore Tables →The Outdoor Dining Chairs Maldives Resorts Keep Reordering
24 models, seven frame-and-weave options. All of it comes off our own factory floor in Jepara, so hotels, restaurants and villas across the Maldives deal with the people who actually build it.
Chair Materials
The seven frame-and-weave options shown above.
Aluminium with Full Mesh
Double-layer textilene, quick-dry.
Aluminium with Rope
UV-resistant Olefin rope weave.
Aluminium with Wicker
German Rehau synthetic wicker.
Aluminium with Synthetic Hyacinth
Weather-safe hyacinth-look weave.
Solid Teak
Grade-A, FSC & TFT certified.
Teak with Rope
Teak frame, Olefin rope weave.
Teak with Wicker
Teak frame, Rehau wicker weave.
Teak & Aluminium
Aluminium structure, teak accents.
Most “tropical-grade” furniture is tested for mainland heat and rain. Ours also survives direct salt spray, standing humidity and monsoon downpours — the actual daily reality on an atoll, not a worst case.
Rope-Weave Dining Chairs in a Resort Courtyard
What Goes Into Every Cushion & Weave
The frame is only half the story — every soft component is specified from the same brands used across our five-star resort projects.
Sunbrella® & Sunproof®
The colour runs all the way through the fibre in this fabric, not just a surface coating. That’s why cushions hold their colour and resist mould under direct sun year-round instead of chalking out after one season.
Quick-Dry Antifungal Foam
Open-cell CVBF foam drains water in minutes instead of holding it. Cushions that stay wet are the main reason mould shows up in humid island climates, so this is the part that actually matters.
YKK Zips (Japan)
Every removable cushion cover runs on Japanese-brand YKK zips. They keep operating smoothly after repeated salt-air exposure and rinsing, which is more than most zips manage after a year at a beach club.
Serafil UV-Resistant Thread
High-performance polyester stitching thread, UV-resistant and colourfast, so seams don’t yellow, weaken or fail years before the fabric does.
Olefin Rope
UV-stabilised, hydrophobic synthetic rope that doesn’t absorb water, dries in minutes and won’t rot, mildew or fade under constant sun.
Marine-Grade Powder Coat
Every aluminium frame is finished in marine-grade powder coating for maximum resistance to salt-air corrosion, UV chalking and scratching.
Every Standard Model, In Your Property’s Palette
Reorder any chair in a different fabric colour, powder-coat finish, rope colour or teak stain — or brief us on a fully bespoke chair built from scratch. Standard customisation carries no extra cost on dining furniture.
- Powder-coat colour matched to your property’s branding
- Fabric selected from the full Sunbrella / Sunproof range
- Teak left natural, oiled, or finished to a custom stain
- Fully custom chair designs — no minimum order to start
Housekeeping Doesn’t Need a Separate Manual for This
Frames wipe clean, no oiling needed on treated teak or aluminium. Cushion covers unzip and go straight in the wash thanks to the YKK hardware. Rope and wicker rinse off and air-dry within the hour. None of it needs re-coating — the marine-grade finishes are built to hold their look for years, not just one season.
The ColorCode Replacement Program
A cracked leg here, a sun-faded cushion there — resort seating takes a beating, and it rarely fails all at once. Because we make every chair ourselves, we keep the fabric batch, powder-coat colour, rope colour and teak finish on file against your original order. Years later, you’re not buying a new set to fix three chairs.
- 1
Your chair codes stay on file with us from the original order — no need to keep your own records.
- 2
Tell us which area needs attention. One chair, ten chairs, doesn’t matter.
- 3
We pull the original frame, weave, fabric and finish codes and match them exactly.
- 4
It’s produced and shipped — no minimum order, even for a single chair.
Tables That Don’t Wobble, Warp or Fade
24 models in teak, sintered stone and compact phenolic. Sizes run from a compact 2-seater bistro table up to a 260cm communal setup, all made to order.
Table Top Materials
The three tabletop materials shown above, each paired with a rust-proof aluminium or marine-grade stainless steel base.
Grade-A Teak
FSC & TFT certified plantation teak.
UV-Resistant Sintered Stone
Non-porous, scratch & heat resistant.
Compact Phenolic
Water-impervious, warp-resistant.
A tabletop that’s fine in KL can still fail here. We test every material against direct salt spray, standing humidity and full-day sun before it goes anywhere near a resort order.
Installed on a Maldives Villa Terrace
Built Not to Wobble
Uneven outdoor flooring — timber decking, textured tiles, sand-set stone — is the most common cause of a wobbly resort dining table. Every base here is engineered to solve that before it reaches your floor.
- Rust-proof, powder-coated aluminium or marine-grade 304 stainless steel bases
- Heavy-duty adjustable leveling glides on every leg
- Teak and teak-and-aluminium hybrid base options
- Extendable mechanisms available for flexible seating capacity
Any Size, Any Shape, Built to Your Floor Plan
Table dimensions aren’t fixed to a catalogue here. A compact 2-seater for a tight bistro patio or a custom communal table for a pool deck — we tailor size, shape, top material and edge profile to your layout.
- Round, square, rectangular and oval — up to 260cm+ on request
- Custom edge profiles and base finishes
- Tabletop, base finish and colour matched to existing chair sets
- No minimum order to start a bespoke table run
Single-Table Replacement & Set-Matching
Maybe it’s one more table to match a set from two years ago. Maybe it’s storm damage to a single piece. Either way, your teak finish, powder-coat colour and top material are already logged against your order code, so we reproduce it without asking you to buy a full new set.
- 1
Your table’s finish and base codes are already on file with us.
- 2
Let us know which outlet or area needs a match.
- 3
We reproduce the exact top material, finish and base — not a close guess.
- 4
Produced and shipped with no MOQ, even for a single table.
How Many Tables Does Your Outlet Need?
A quick layout guide for planning covers across an F&B outlet, pool deck or villa dining area.
Bistro / Poolside
S80 square or D80 round tables — Teka, Onyx or Sintered Stone — for bistro patios, cabana-side dining and compact villa terraces.
Alfresco Restaurant
L150 rectangular tables — Senara, Livara, Laro or Gather — the standard cover count for most alfresco resort restaurant floors.
Communal / Banquet
L240–L260 oval and extendable tables — Corda Oval, Tanah or Horizon Extendable — for family-style resort dining and event seating.
Outdoor Dining Furniture Maldives — Common Questions
What’s the best material for outdoor dining furniture in the Maldives?
Depends where it’s sitting. For frames, teak, powder-coated aluminium or the teak-and-aluminium hybrid all handle salt air and monsoon rain well. For tabletops, sintered stone is the toughest option in full sun on a pool deck; teak is the better call where guests want the natural-wood look.
Can I order a single replacement chair or table instead of a full set?
Yes — that’s really the point of manufacturing it ourselves. Your fabric, powder-coat, rope and teak-finish codes stay on file, so a single matching chair or table can be reordered any time. No minimum.
How long does shipping take to Malé?
Around 4–5 weeks to Malé once it leaves our Shah Alam hub in Malaysia, on top of production time — worth building into your timeline early if you’re working to an opening date.
Will the cushions fade or grow mould in the humidity?
They shouldn’t, if the spec is right. Sunbrella or Sunproof fabric, quick-dry antifungal foam and UV-resistant Serafil thread is what actually resists fading and mildew in constant humidity — not a marketing line, just the combination that holds up.
Can furniture be customised to match our resort’s branding?
Yes. Powder-coat colour, fabric, rope colour and teak finish are all customisable on standard models at no extra cost. Need something built from scratch instead? That’s a separate conversation, but we do that too.
Do you supply directly, or through a trading company?
Directly. We manufacture out of our own 4,000 sqm facility in Jepara, with a logistics hub in Shah Alam, Malaysia — no trading-company markup in between, and no MOQ on replacement orders.
Planning an Outlet Somewhere in the Maldives?
Tell us the outlet size, seat count and the materials you’re leaning toward. We’ll reply with real pricing and lead times, usually within a day or two — not a sales call.
